(En) 1.1 Preface - RP-Tools RP-R series Montageanleitung

Hebebühne - RP-R- - ab 2014 – RMW - Montage
RP-TOOLS® -

(EN) 1.1 PREFACE

This manual is not an operating or service manual but an in-house training guide to
assist in working on the product (RMW). RMW = repair, installation, maintenance.
This manual is intended for technically qualified personnel with appropriate training who
have the essential information necessary for the correct operation of the specific product
type in order to avoid typical hazards to the application.
However, if you have any doubts or questions regarding the work to be done, then
please contact our maintenance service.
To ensure a long, safe and problem-free life of your RP-TOOLS product maintenance
should only be performed by RP TOOLS certified personnel or RP TOOLS dealers.
The knowledge, equipment and skills required to properly maintain your RP-TOOLS
product are only available from RP-TOOLS certified personnel or RP-TOOLS authorized
distributors.
There is no liability for imitation of the instructions, not even for the accuracy and
completeness in the technical sense. All statements without guarantee. Owners of a RP-
TOOLS product must be aware that parts, accessories and conversions are only
approved if they have the appropriate manufacturer approval. In particular, it is very
dangerous to assemble or replace parts or accessories that require disassembly or
expansion of the electrical system or hydraulic system. Any such modification can lead to
a security risk. The installation of unauthorized parts, accessories or conversions may
affect the safety features, stability or other aspects of the operation of the lift and may
result in an accident involving serious injury or death.
This internal training and repair manual is reserved for certified RP-TOOLS
employees or partners only.
WARNING
This manual does not replace the operating or service instructions of the
product.
Please read the instructions contained in the product prior to any
WARNING
independent intervention in the product and in any case ask the
manufacturer.
Repairs may only be carried out by certified RP-TOOLS employees or
partners. For damage caused by improper work, neither the author of this
manual nor the manufacturer can be held responsible.
WARNING
RP-TOOLS disclaims any liability for defects resulting from the installation of
unauthorized parts, accessories or conversions or the installation of
approved parts, accessories or conversions caused by improper installation.
WARNING
DE/EN - REV. 01 – Ver.: 2017.11.30
10 / 83