E General Provisions; Explanation Of Symbols; Maintaining The Unit - uebe visomat medic Gebrauchsanleitung

E
1.

Explanation of symbols

0123
This product complies with the Council Directive 93/42/EC from 5
September 2007 regarding medical devices, which became effec-
tive on 21 March 2010 and bears the mark CE 0123 (TÜV SÜD
Product Service GmbH). Units with CE marks are subject to quality
inspections in accordance with this Directive and provide a higher
level of accuracy than previous calibration.
Please observe instructions for use
Storage and transportation conditions
Ambient temperature -20 to +70 °C
Protect against moisture/humidity
Rel. air humidity up to 85%
Keep dry
EN-34
General provisions

Maintaining the unit

• The unit contains sensitive parts and must be protected against strong vari-
ations in temperature, air humidity, dust and direct sunlight.
• We recommend that you have the intactness and accuracy of the unit checked
after heavier falls or impacts.
• The unit is not water-proof.
• Please use a soft, dry cloth to clean the unit only. Do not use benzene, thin-
ners or other strong solvents.
• Do not scrub or machine-wash the cuff. Please use synthetic cleaners and
softly rub the surface.
• Make sure that liquid cannot get into the air hose. Dry thoroughly.
• If the unit has been opened, it must be subjected to a metrological inspection
conducted by an authorised organisation.
F
EN-35