Description; Operation - Dustcontrol DC 2800c Rental Originalbetriebsanleitung

Description

Th e machine should be used for suction and separation of
dried dust. Th e machine fulfi l the demands for separation
of unhealthy dust.
Th e DC 2800c Rental is, despite it's compact size, a full
capacity Dustcontrol machine. It is stable, tough and reliable
and particularly suited to spot extraction in many diff erent
applications ie: welding, grinding, sanding and cleanup
with the 38 mm program. Dust separation is in any case as
effi cient as with the larger Dustcontrol machines.
The design is ergonomic and appealing. With a very
low sound level of 70 dB(A) at 1m distance, the
DC 2800c REntal is suitable for use in areas which are sen-

Operation

Connect the unit to a suitable power source, note require-
ments on the ID plate. If an extension cord is to be used,
only waterproof cords are acceptable.
Th e DC 2800c Rental is equipped with a fi lter indication
lamp that indicates when the fi lter needs cleaning or chang-
ing. Th e fi lter is genereally cleaned once or twice daily during
normal continuous operation. Th e unit must be in operation
to perform fi lter cleaning. Loose the tube from the suction
pipe and press the plastic cage against the black stop head
on the exhaust channel so that maximum pressure is created
in the cyclone.
Open the port on the side o the unit three to six times. Th is
reverse pulse of air cleans the fi lter.
To make an easier decision when you should change
the fi lter, the machine is equipped with a connection
to which you connect a digital negative pressure meter.
With help of the meter you get information about the
condition of the fi lters.
Th e plastic sack should be changed only after fi lter cleaning is done and when the collected material level is about 5
cm under the foot valve.
Th e collection sack must be tied off when it is removed from the unit. Th is is most easily done with the sacks own tie
strap. Be sure to put on a new strap before installing a new collection sack. Follow the instructions below.
Use only original Dustcontrol spare parts.
sitive to noise. Th e direct drive two stage high pressure fan
is integrated into the units top. Th e 1200W capacity fan is
double insulated for higher safety.
Th e DC 2800c Rental is equipped with a running time
meter to be able to estimate for example; the need for a
HEPA fi lter change. On the cover is a connection for a
digital negative pressure meter where an engineer can judge
the condition of the main fi lter.
DC 2800c Rental, 10
Part No 94103