Safety Considerations; Technical Data - Dustcontrol DC 2800c Rental Originalbetriebsanleitung

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
risk of fi re, electric shock and personal injury, including
the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2. Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the
material you are working with ie asbestos. Don´t use
the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with parts of
the body. Th e strong suction eff ect can
hurt the blood-vessels in the skin. Don´t repair the
electric components yourself, get some-body quali-
fi ed. Faults may cause injury. See also below under
warnings.
4. Don´t abuse cord
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable regu-

TECHNICAL DATA

HxWxL
Weight
Inlet
Hose length
Collecting sack, 11 l
Flow, max
Neg. pressure, max
115/220V
Power consumption
115/220V
Fine fi lter polyester, area
Degree of separation
(EN 60335-2-69, Class M)
Filter area, microfi lter
Degree of separation,
microfi lter
(EN 1822-1)
(EN 60335-2-69, Class H)
Sound level
5.
followed to reduce the
6. Maintain the machine with care
7.
8. Warning
1070x420x510 mm
14 kg
φ 50 mm
5 m
500x550 mm
190 m 3 /h
21/24 kPa
1200 /1400 W
1.5 m 2
99,9 %
2
0.85 m
HEPA H13
99,995 %
< 68 dB(A)
DC 2800c, Rental 9
larly if damage.
Important measure
With cleaning and maintenance on the machine,
the power cable should be dis-connected from the
supply.
Keep machine clean and check that the hose is enti-
red and that all gaskets are tight. Follow instructions.
Keep handles dry and free from oil and grease.
Checking of damage
Before futher use of the machine it should be care-
fully checked that the machine is unda-maged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authori-zed service center.
Use only accessories and replacable parts which are
available in Dustcontrol catalogue.
Vacuum producer
capacity
kPa
20
1400 W
15
10
1200 W
5
0 50 100 150 200 m
3
/h
Part No 94103