Ossur Flex-Foot Axia Bedienungsanleitung Seite 6

• To remove: Grab the exposed end of the insert with pliers and pull to remove.
• To attach permanently: Trim the insert to the width of the keel tarsal core.
• Apply a drop of Loctite 495 to the bottom of the rib and put in the insert.
Flex-Foot Sock FCX63006, FCX63007
To protect the cover and avoid noise a Flex-Foot sock is fitted over the foot module
before installing the cover. The sock should be pressed between the toes, be loose in the
heel area and secured proximally with the cable tie provided.
Shoe Horn CM100068 (Figure F)
When removing and installing the cover use shoehorn
to avoid damage to foot or cover.
Note: Do not expose Tarsal Core to heat, abrasive
materials or excessive moisture as it may cause damage.
6