Safety Recommendations - SKF TKSA 40 Bedienungsanleitung

• Always turn off the power of the drive machine before you start
working.
• Do not expose the equipment to rough handling or heavy impacts.
• Always read and follow the operating instructions.
• The tool uses two laser diodes with an output power below 1 mW.
Still, never stare directly into the laser transmitter.
• Calibrate the equipment regularly.
• Never aim the laser line into someone's eyes.
• Opening the housing of the measuring unit may result in hazardous light
exposure and voids warranty.
• The equipment should not be used in areas where there is a risk for
explosion.
• Do not expose the equipment to high humidity or direct contact with
water.
• All repair work should be taken care of by an SKF repair shop.
4

Safety recommendations

SKF TKSA 40