Fluctuating Measurement Values; Incorrect Measuring Results; Measurement Results Cannot Be Repeated - SKF TKSA 40 Bedienungsanleitung

6.2.4 Fluctuating measurement values

a) Ensure tight attachment of fixtures and measuring units.
b) Ensure that the laser lines hit the detectors.
c) Ensure that air turbulence does not influence the measurement.
d) Ensure that direct bright light or obstructed laser lines do not influence the
measurement results.
e) Ensure that external extensive vibrations do not influence the measurement.
f) Ensure that radio communication devices (such as walkie-talkies) do not influence the
measurement.

6.2.5 Incorrect measuring results

a) Ensure you face the Stationary machine from behind the Movable machine.
b) Check the attachment of fixtures and measuring units.
c) S-cable to S-unit and M-cable to M-unit?
d) S-unit on Stationary and M-unit on Movable machine?
e) Ensure right position before confirmation of measurements.

6.2.6 Measurement results cannot be repeated

a) Check if there is a soft foot condition.
b) Check if there are any loose mechanical parts, play in bearings or movements in the
machinery.
c) Check the status of foundation, base plate, bolts and existing shims.
SKF TKSA 40 31