Save The Measurement Results - SKF TKSA 40 Bedienungsanleitung

To get the feet adjustment values which are needed for the alignment, the B and C
dimensions need to be given (see section 3.4).
With the selection arrows, navigate to the required fields.
Inform the values with the help of the alphanumerical keyboard, and press OK to confirm.
To display the feet adjustment values, once all values entered, navigate to the main results
icon and press OK.
Next steps:
From the main results screen you can navigate to:
Save results module, to save the results displayed of the screen. See section 3.7
Adjustment module, to correct the alignment of the moveable machine. See section 3.8
Measurement module, to measure the alignment, See section 3.5
Soft foot mode, to check the presence of a soft foot on the moveable machine and correct
it (only available when all distances are entered). See section 3.9
File manager, to display and manage the saved files. See 5

3.7 Save the measurement results

The measurement results can be saved in the internal memory of the display unit.
Up to 100 measurements can be saved.
Once the measurement results are displayed on the screen, navigate to the "save file" icon
and press OK.
SKF TKSA 40 19