Titan Performance 450e Serie Betriebsanleitung Seite 20

Attention: Danger of injury by injection!
Airless units develop extremely high spraying pressures.
1 Never put your fingers, hands or any other parts
of the body into the spray jet!
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without safety guard.
Do not treat a spraying injury as a harmless cut. In case of
injury to the skin through coating materials or solvents,
consult a doctor immediately for quick and expert treatment.
Inform the doctor about the coating material or solvent used.
The operating instructions state that the following points must always be
2
observed before starting up.
1. Faulty units must not be used.
2. Secure Titan spray gun using the safety catch on the trigger.
3. Ensure that the unit is properly earthed. The
connection must take place through a correctly
earthed two-pole and earth socket outlet.
4. Check allowable operating pressure of high-pressure hose
and spray gun.
5. Check all connections for leaks.
3 The instructions regarding regular cleaning and maintenance
of the unit must be strictly observed.
Before any work is done on the unit or for every break in
work the following rules must be observed:
1. Release the pressure from
spray gun and hose.
2. Secure the Titan spray gun using
the safety catch on the trigger
3. Switch off unit.
Be safety-conscious!
GB
Warning!
18
PE
0 bar
Performance Series 450e