VS LearnBox. Bedienungsanleitung Seite 9

1
1.3 Combination locks with free code
Closing and opening the combination lock [Figure 1]
Thanks to the code clearance technology, all the digits
display "0" when the cabinet is open.
Set your personal code (1) and close the lock by turning it
to the left. This automatically clears the code (2).
To open the cabinet, enter your defined code (3) and unlock
by turning the lock to the right.
The code is cleared again and all the digits display zero (4).
The lock is now ready to be used again.
Caution! The customer must be given the
manufacturer's operating instructions.
2
(1)
(2)
(3)
(4)
Emergency opening with code reset [Figure 2]
Important! You can obtain the emergency key from
the building's administrative office.
Insert the emergency key (5) in the lock and turn it to the
right until you hear a click.
Starting from the lock mechanism end, turn the digit wheels
(6) until you hear a click.
Then turn the emergency key 180° to the left (7) and unlock
by turning the lock to the right. Remove the emergency key.
The programmed code is deleted and the digits are set to
zero (8). The lock can now be used again normally.
(5)
(7)
(6)
(8)
9