VS LearnBox. Bedienungsanleitung Seite 8

1
3
4
(2)
1 Adjusting the lock
Adjusting the locking direction [Figure 1].
Adjusting the key blocking mechanism [Figure 2].
8
2
(1)
(1)
(3)
1.1 Combination locks
Combination locks are opened without the need for a key
using a 4-digit code.
In the case of combination locks with a fixed code, the
freely definable code is entered by the user once to open
the unit and this setting is then retained. In the event of a
change of user, the fixed code can be reprogrammed.
Combination locks with free codes allow different users to
lock the cabinet securely. A personal code must be entered
again every time the cabinet is opened and closed. The au-
tomatic cancellation of the code by resetting the value to
zero increases security.
1.2 Combination locks with fixed code
Opening the combination lock [Figure 3]
Choose the factory-set code 0000 (1) or the defined code.
Open the lock by turning to the right. The digit wheels are
reset to 0000 (to cancel the previous code).
Changing the code [Figure 4]
Choose the factory-set code 0000 (1) or the defined code.
Press the locking bar (2) down until you hear a click. Enter
the new code (3). Press the locking bar up until you hear a
click. The new code is stored.
Caution! The customer must be given the
manufacturer's operating instructions.