GB
IE
NI
Connecting /
E
disconnecting the
tap water
1. Screw the faucet
coupling (6) to faucet.
2. Insert the inlet hose
male coupling (5) into
the faucet coupling (6)
with audible "click" to
secure
3. Pull back the sleeve
of inlet hose male
coupling (5) to
disconnect the water
connection.
F
Shifting hose
stopper
1. Loosen the 2 cross-
head screws on hose
stopper (8) with a
screwdriver
2. Hold the outlet hose (9)
securely and shift the
stopper (8) to desired
position, screw tightly
again with the 2 cross-
head screws.
12
Operation
Caution! Never
allow the hose
to retract freely.
This could result
in damage to the
product.
Never use the hose
box in the frost
period.
Locking / unlocking
G
outlet hose
During unwinding
1. Hold the outlet hose
(9) securely and pull
the outlet hose out to
desired length.
2. Stop pulling and allow
the outlet hose (9)
return slowly to lock. If
not, pull out the outlet
hose a short tug (10cm
at the beginning and
5cm at the end) again
and allow the outlet
hose (9) return to lock
3. Pull out the outlet hose
a short tug (10cm at