Clatronic MC 1020 DVD Bedienungsanleitung Seite 41

Optional audio connections
Notes when connecting the optical digital audio cable
(optional)
i
Remove the dust protection cap from the optical digital
audio output and connect the cable firmly so that the
configurations of both the cable and the connector match.
i
Keep the dust protection cap and to protect against dust,
always reattach the cap when not using the connector.
Concerning the audio output from the player's
optical/coaxial digital audio output connector
Disc Sound
recording
format
DVD
Dolby Digital
(AC-3)
Linear PCM
(48/96 kHz
16/20/24 bit)
Video MPEG 1
CD
CD Linear PCM
*1 The type of audio output from the connector can be
selected by the initial settings.
*2 Sound having 96 KHz sampling is converted into 48 Khz or
96KHz sampling when it is output from the player's
optical/coaxial digital audio output connector.
For your reference:
i
Dolby Digital (AC-3) is a digital sound compression
technique developed by the Dolby Laboratories Licensing
Corporation.
i
Linear PCM is signal recording format used in a CD. While a
CD is recorded in 44.1 KHz/16 bit, a DVD is recorded in 48
KHz/16 bit up to 96 KHz/24 bit.
i
If you have a Dolby Pro Logic Surround decoder, you will
obtain the full benefit of Pro Logic from the same DVD
movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround
mark.
Optical/coaxial digital audio
output from connector
Dolby Digital bitstream
(2-5.1ch) or PCM (2ch)
(48 kHz/16 bit)*1
Linear PCM (2ch)
(48 kHz sampling/16 bit only)*2
or no output*1
PCM
(44.1 kHz sampling)
Linear PCM
(44.1 kHz sampling)
Dust protection cap
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works.
Laboratories, inc. All rights reserved.
39
1992-1997 Dolby
C