Installation Of The Device - Peiying PY-DVR010 Bedienungsanleitung

Installation of the device

DVR:
1. Install the device on the holder.
2. Clean the place on the windshield where you want to install
your device, then use the suction cup to attach the holder to
the windshield.
3. Press the lock bar upwards and adjust the device to the best
shooting position.
4. Insert one end of the car charger into the mini USB port of
the device and then insert the other end into the car charger
socket.
Note: Place the power
cord in a position which
would not interfere during
driving a vehicle.
EN
Rear view camera:
Prior to installation, select and mark suitable location. If possible,
and tape off the area to be drilled with masking tape in order to
protect the surroundings. The camera (1) should be located in a
place that provides:
1. Proper field of view, with no parts of the vehicle within its
sensing area which in turn could disturb their operation.
20
Owner's manual