Playback Mode; Usb Mode - Peiying PY-DVR010 Bedienungsanleitung

Playback mode

1. In the Camera mode, press the M button to switch to playback
mode. Use direction buttons (up and down) to browse files.
Press the OK button to play the video.
2. Press the menu button to enter submenu where you can
delete or protect files.
Note: Protected files cannot be covered by loop recording or
deleted until unlocking them.
G-Sensor
When G-Sensor is on, the DVR will protect and lock current video
once G-Sensor has been triggered by instant impacts or shocks
from traffic accident. To set the sensitivity of G-Sensor, press the
menu button while in the recording mode and enter G-Sensor
menu. Available options are Off/ High/ Medium/ Low. Default
setting is [Medium].

USB mode

EN
Connect the DVR to the PC with the USB cable. Select one of the
two options:
1. Mass storage: driver will be automatically installed when
connected to the PC for the first time. In this mode, user can
browse files.
2. PC camera: driver will be automatically installed when
connected to the PC for the first time. After installation, the
DVR can be used as a camera.
24
Owner's manual