Installation - Peiying PY0105 Bedienungsanleitung

Back
1. Camera
2. Power supply input
3. AV signal output

inStallatiOn

Plate installation
1. Remove license plate and license plate frame from the rear
of the vehicle.
2. Select and mark proper drilling spot (behind license plate,
where the camera's cable will be routed). Before drilling
the holes in vehicle's body, make sure to select location
in which you will not damage any electrical cables, brake
system, fuel tank etc. Also, before drilling, determine the
best way to run the cables through the vehicle. Ensure the
EN
Owner's manual
13