Siemens SITRANS F series Betriebsanleitung Seite 34

Connecting
3.4 Programming the Transmitter
Create a Site
1. At the [Channel Setup] menu press the <Right Arrow>.
Note
Before proceeding make sure that English or Metric units have been selected.
2. Press the <Down Arrow> to select the [Create/Name Site] and enter a Site name.
3. Press <Right Arrow> to create Site name (e.g., ABC).
Note
To select letters: Press <Right Arrow> to cursor and then press <Up/Down Arrows> to
select letters. Press <ENTER> when done.
4. Press <Left Arrow> and return to the [Channel Setup] menu.
Note
After site configuration procedures that follow are complete the newly created site must
be saved again to retain the new site data. Refer to the Save/Rename Site procedure
below.
32
①
Insert desired name (8 characters max.)
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 07/2014, A5E03086486-AD