Honeywell HO-1100RE Gebrauchsanweisung Seite 6

ENGLISH
Cleaning
1. Before you start cleaning, switch off the fan with the
key (12) and pull the power plug (5) out of the power
socket. Take the batteries out of the remote control (7).
2. Clean the outer surfaces of the fan and the remote
control (7) with a soft, damp cloth. Do not use paraffin,
thinner or any other chemicals. Use the brush attachment
of your vacuum cleaner to clean the grid.
3. Do not immerse the fan or the remote control (7) in
water or any other liquids and do not pour water or any
other liquids over the fan or remote control (7).
4. Put the batteries back into the remote control (7).
Resume using the fan as described in the „Instructions
for use".
Storage
1. If you do not wish to use the fan and the remote control
(7) for a longer period (four weeks or more), clean them
as described in the section on „Cleaning". Take the
batteries out of the remote control (7).
2. Put the remote control (7) into its slot (10).
3. Store the fan and the remote control (7) in a cool, dry
place.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes
responsibility for the correct use and care of this KAZ
product according to these operating instructions.
The purchaser or user must himself or herself decide
when and for how long this KAZ product is to be in
operation.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT,
PLEASE OBSERVE THE INSTRUCTIONS IN THE GUARANTEE
CONDITIONS. DO NOT ATTEMPT TO OPEN OR REPAIR THIS
KAZ PRODUCT YOURSELF, AS THIS COULD LEAD TO
TERMINATION OF THE GUARANTEE AND CAUSE DAMAGE
TO PERSONS AND PROPERTY.
Technical modifications reserved
6