Werbung
Install iPad® in Holder
Press the iPad® into the holder [01] making sure
the corners of the holder [01] fi t over the corners
of the iPad® and that the iPad® is secure.
14
Attach Holder to Arm
[01]
To Remove Holder from Arm
Place the center ring of the holder [01] onto the
faceplate of the arm [02]. The holder [01] will
magnetically attach.
[01]
To remove the holder from the arm, twist the
holder [01] horizontally or vertically until it
releases from the faceplate of the arm [02].
[02]
[02]
[01]
Werbung
