Sanus VTM5 Bedienungsanleitung Seite 11

CAUTION:
3
property damage! Pilot holes MUST be drilled
to a depth of 63.5 mm
(1/8 in.) diameter drill bit.
63.5 mm
(2½ in.)
Avoid potential injuries or
(2½ in.) using a 3 mm
CAUTION:
4
holding power of the mounting screw [06]. To
avoid potential injuries or property damage: DO
NOT over-tighten the mounting screw [06].
[06]
Improper use could reduce the
[06]
11