Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Installation
The fresh water unit is pre-assembled and comes ready wired.
•
The system should be installed on a dry load-bearing wall.
•
The fresh water unit must be installed as low as possible so that it is positioned at the height of the cold region of the stratified tank.
•
The pipes must be connected according to their function (see drawing).
Installation diagrams
Compact design, S-Line
Distance from wall to centre of connections: 82 mm
Note: *By using connectible insulation wedges (optional accessories) to create a pre-formed rear wall insulation
it is possible to install the fresh water unit directly on a tank (diameter ≥ 600mm).
Please note: The safety fuse on the cold water side must comply with DIN 1988, i.e. with safety group and
an expansion vessel.
*Example: connectible insulation wedge (optional) for tank installation
26
Standard design, M-Line
Werbung
Kapitel
Inhaltsverzeichnis
