Intended Use; Commissioning; When Working On The System; Liability - Meibes LogoFresh M-Line Technische Information Für Montage Und Betrieb

1. Safety instructions

1.2 Intended use

Appropriate use in heating and domestic water systems in accordance with the applicable DIN standards. Installing and operating the assembly incorrectly will
invalidate any warranty claims. The shut-off valves may only be closed by an authorised specialist when servicing, otherwise the safety valves will not work.
Caution:
Do not make any changes to the electrical components, the design of the system or the hydraulic components!
This would adversely impact on the safe function of the system.

1.3 Commissioning

Before commissioning, the system should be checked for leak tightness, correct hydraulic connection and accurate and correct electrical connections.
It is also necessary to flush the system thoroughly or as required. Commissioning must be performed by trained experts and recorded in writing.
The settings must also be recorded in writing. The technical documentation must remain with the device.

1.4 When working on the system

The system must be disconnected from the mains and monitored to ensure that no voltage is being supplied (e.g. at the separate cut-out or a main switch).
Secure the system against being restarted. (With gas-fuelled systems, close the gas shut-off valve and secure it to prevent it from being opened accidentally).
Repairs to components with a safety function are not permitted.

1.5 Liability

We reserve all copyrights for this document. Misuse, in particular the reproduction or disclosure to third parties is prohibited. These installation and
operating instructions must be given to the customer. The technical team carrying out the work (e.g. installer) must clearly explain to the customer how the
unit works and operates.
20