Parts List - Renishaw TS27R Installations- Und Benutzerhandbuch

1-16
PARTS LIST – Please quote the part no. when ordering equipment
Type Part no.
TS27R (disc) A-2008-0397
with MI 8-4
TS27R (square) A-2008-0396
with MI 8-4
TS27R (disc) A-2008-0367
with MI 8
TS27R (square) A-2008-0366
with MI 8
TS27R (disc) A-2008-0368
TS27R A-2008-0388
Break stem kit A-5003-5171
Stylus holder kit A-2008-0389
Stylus holder M-2008-0378
Disc stylus A-2008-0382
Square stylus A-2008-0384
Grubscrew P-SC11-0404
Screw P-SC01-X406
C spanner A-2008-0332
MI 8-4 A-2157-0001
MI 8 A-2037-0010
MI 8/DIN mount A-2037-0020
Description
TS27R holder, probe module, break stem (× 2), disc stylus Ø12.7 mm
Ø0.5 in) and MI 8-4 interface.
TS27R holder, probe module, break stem (× 2), square tip stylus 19 mm
(0.75 in) and MI 8-4 interface.
TS27R holder, probe module, break stem (× 2), disc stylus Ø12.7 mm
(Ø0.5 in) and MI 8 interface.
TS27R holder, probe module, break stem (× 2), square tip stylus 19 mm
(0.75 in) and MI 8 interface.
TS27R holder, probe module, break stem (× 2) and disc stylus Ø12.7 mm
(Ø0.5 in).
TS27R holder, probe module, break stem (× 2) and stylus holder (without
stylus).
Stylus protection kit comprising break stem, captive link, grubscrew (× 3),
caphead screw (× 2) and tools (hexagon wrenches and support bar).
Stylus holder kit comprising stylus holder and screws.
Stylus holder.
Disc stylus Ø12.7 mm (Ø0.5 in), tungsten carbide, 75 Rockwell C.
Square tip stylus 19.05 mm (0.75 in), ceramic tip, 75 Rockwell C.
Grubscrew (flat end) for stylus holder M4 × 4 mm (two required).
M4 cap head screw for stylus holder (one required).
C spanner – used for removing the probe's front cover.
MI 8-4 interface unit with dual lock pads and DIN rail mounting.
MI 8 interface unit with stud or foot mounting.
MI 8 interface unit with DIN rail mounting.