Siemens Synco 700 RMS705 Bedienungsanleitung Seite 37

Copying a time program within a 1-week period
1. Select the day to be copied.
2. Turn the OK knob in clockwise direction until Copy to:
appears.
3. Press the OK knob.
4. The menu with the choice of days (week sections,
individual weekdays, special day) appears.
5. Select the required weekday or week section.
6. Copy (press the OK knob).
Copying a time program to other time switches
1. Select the time switch to be copied and confirm by
pressing the OK knob.
2. Turn the OK knob in clockwise direction beyond the
weekdays and the special day until you reach Copy to:
3. Press the OK knob.
4. Menu with choice of time programs appears.
5. Select the required menu item and copy the entire 7-
day program to the time switch using the OK knob.
Tip: First, create a 7-day schedule for the daily switching times – this will make it easier to enter the times in the RMS705!
Building Technologies / HVAC Products
Creating or changing a 24-hour program
The RMS705 is supplied with a 24-hour program for
every weekday (incl. special day). This means that you
will never have to create a new 24-hour program, but
only change an existing program.
Power failure – no more on / off time program?
In the event of a power failure, the 24-hour programs
entered will be maintained, independent of the duration
of the power failure.
CE1B3123x2-en 74 319 0503 0 a
13
06.04.2006