Herunterladen Inhalt Inhalt Diese Seite drucken

Parental Control; Change To Store Or Home Mode; Software Update; Common Interface Services - IKEA UPPLEVA Handbuch

Vorschau ausblenden Andere Handbücher für UPPLEVA:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Parental control

In the lock function you can restrict certain
content or actions to only be available when
entering a password, (see chapter 7 Options
and settings - Password). You can restrict
the following:
Parental rating (To request password
for content intended for a certain age
and up),
Input lock (To request password for
accessing certain sources),
Front panel lock (To request password
when using the local buttons),
Installation lock (To request password
for entering the Setup menu) and
Max volume (To request password for
increasing the volume past a certain
level).
To set restrictions follow these steps.
1. Press MENU on the remote control and
select Options. Go to Lock and enter the
password.
2. Set your preferred restrictions and close
the menu by pressing EXIT.

Change to Store or Home mode

If you watch the TV at home, use the
Home mode. This means that the TV will
enter standby mode if you do not use the
controls for 4 hours. This is according to the
European Commission regulation 2009/125/
EC.
For stores: to change to Store mode, follow
these steps:
1. Press MENU on the remote control and
select Options > Location.
2. Press / to select Store.
3. Press EXIT to exit.
If the TV is used in a store, choose the
Store mode.

Software update

Note: Do not switch off or unplug the TV
until the upgrade is completed.
Press MENU on the remote control and
select Options > Software update. Press
OK to enter.
By network: Enables you to download
and install the latest software version
from the internet. Make sure to set up
a wired or wireless network connection
first then select By network and press
OK to enter. When a new version of the
software is available, a progress bar
appears. When the download finishes,
the TV will go black and upgrade the
software.
Note: Make sure you have a network
connection during the upgrade.
By channel: On rare occasions a
software update can be made available
via the broadcast. By default the TV will
download the software automatically
when available. You will then get a pop
up where you can choose to install
the software immediately or at a later
stage. If you don't want to download
the software automatically and prefer
to search for available software you can
deactivate this function. To activate/
deactivate and search for available
software follow these steps.
Use / to select Yes under
Auto download to automatically
download the latest software if
available. After the software has
been downloaded successfully, you
will be prompted to decide if you
want to install it right now. If yes,
follow the on-screen instructions to
complete your installation. You can
also select to ignore the installation
here.
Use / to select No under Auto
download to decline the automatic
download.
Use
/
to select Manual
Download and press OK if you
wish to search manually for the
latest software. Follow the on-screen
instructions to complete. During the
search, press OK/EXIT to cancel or
exit the process.

Common interface services

On-screen applications and content via the
common interface card are provided by
your digital TV service operator. To manage
these services, press MENU on the remote
control and select Options > Common
interface.
Note: This menu option is only available if
the common interface module is correctly
inserted and activated. See Chapter 4
Connections – Common interface CI+/CAM
card.
41

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis