Using Your Tv; Switch The Tv On And Off; Tv Menus; The Home Screen - IKEA UPPLEVA Handbuch

the message indicating that the setup is
complete.

6 Using your TV

Switch the TV on and off

1. When the power cord is connected, the
TV will turn on directly or be in standby
mode. A red indicator light on the front
of the TV shines when the TV is in stanby
mode. If the TV is in standby mode,
press the button on the TV or
remote control to turn it on.
2. To put the TV into standby mode, press
the button on the TV or
remote control. The TV remains powered
up, but with low energy consumption.
3. To switch the TV off, unplug the mains
plug from the mains outlet.

TV Menus

1. Press MENU to display the main menu.
(Refer to Figure 3.)
2. Press / to select what you want, then
press OK to enter the corresponding
submenu.
3. In submenus, use
options and use / to set functions
or change values. Use OK to activate
a setting or enter the corresponding
submenu.
4. Press MENU to return to the previous
menu.
on the
on the
/ to select menu
5. Press MENU to close the menu.
Note: Some options may not be available
for certain signal sources.

The Home screen

The Home screen is the key to your TV.
Here you can choose between watching TV,
using Smart TV or accessing your media or
connected sources. You can always access
your Home screen by pressing
remote control, except if you are using
Smart TV. You then need to press EXIT to
leave Smart TV and go to the Home screen.
Use / to switch to what you want, then
press OK to select.

Using Smart TV

SMART TV makes it possible to connect to
the internet and get access to interactive
services, watch movies and listen to music
online on your TV. This requires an internet
connection, either wireless or via cable.
Notes:
— Connect to a network before using
Smart TV.
— Slow responses and/or interruptions
may occur, depending on your network
conditions.
— If you experience a problem using an
application, please contact the content
provider.
— According to the circumstances of
the content provider, an application's
updates or the application itself may be
discontinued.
— Depending on your country's
regulations, some applications may have
limited service or not be supported.

Using Smart TV applications

1. Press to go to the Home screen,
select Smart TV and press OK to go to
the Smart TV portal.
2. Use the navigation buttons to select the
application you want to use and press
OK to open it.
3. To return to the Smart TV portal press
SMART on the remote control.
4. To leave Smart TV press EXIT on the
remote control.
To get quick access to Smart TV you can
press SMART on the remote control. You
29
on the