Time Shift; Personal Video Recorder (Pvr) - IKEA UPPLEVA Handbuch

Time shift

This function allows you to record a TV
programme. Make sure you have connected
a USB device and that there is enough
space on it before you start recording. The
first time you use Time shift you need to do
a disk setup for the USB device. To do so
follow these steps.
1. Press MENU on the remote control and
select Setup > Time shift.
2. Press / to select On to switch on the
time shift function, then press EXIT to
close the menu.
3. Press OPTION on the remote control
and select Time shift. Press OK to
confirm.
4. Follow the directions on the screen to do
the setup.
Follow these steps to use Time shift.
5. Press OPTION on the remote control
and select Time shift.
6. Press OK to display the time shift menu
and press / / / /
─ Press to start the recording. The
picture pauses.
─ Press to play the recorded part.
─ When the time shift menu disappears
and only the timing of the time shift
remains on the screen, you can press
or OK to access the time shift menu.
─ Press to fast backward or
forward.
─ Press to quit the time shift function.
Notes:
— Before you connect the USB drive to
the TV, make sure you have backed up
the data in the drive to avoid the loss of
your data in case of a malfunction.
— We recommend you use a USB drive
with free capacity above 1GB and disk
speed faster than 5.0MB/sec.
— The more free memory on the the USB
drive, the longer the recording length.
— If you change the channel in time shift
mode, a message prompts you to select
Yes or No. You can select Yes to exit
the time shift function and change the
channel.
— This feature is available only in selected
TVs and, due to specific TV network
limitations and country technical
requirements, might not be available
in your TV or place of installation. This
feature might also be blocked by a TV
network due to copyright protection (HD
to use it.
to fast
content, recording protection). Please
use OPTION on the remote control to
check if this feature is available in your
TV.

Personal Video Recorder (PVR)

Allows you to record your favourite TV
programmes. Before you use the function,
connect a USB drive to the TV.
Note: This feature is available only in
selected TVs and, due to specific TV
network limitations and country technical
requirements, might not be available in
your TV or place of installation. This feature
might also be blocked by a TV network
due to copyright protection (HD content,
recording protection). Please use OPTION
on the remote control to check if this
feature is available in your TV.
1. Press OPTION on the remote control
and select Quick access > PVR.
2. Press OK to enter
Or
Press REC on the remote control to
enter the PVR menu directly.
3. Follow these instructions to use the PVR.
Press REC on the remote control to start
─
recording. The recorded file is saved in a
folder named after the channel number
in the PVR folder in Media > Video.
─ Use / / / to adjust the recording
duration.
─ Press to stop recording manually; in
normal operation, the recording will
stop automatically when the recording
duration has passed.
4. When recording, the PVR mini pane will
also show on the screen to indicate the
recording progress.
5. To watch the recorded programme, exit
PVR mode and go to Media > Video.
Select the folder PVR, then select the
recorded file. Press OK to play.
Notes:
— This feature is available only for non
encrypted digital channels. Even when
CICAM (CI or CI+) is inserted, this
feature is not available on encrypted
channels.
— Before you connect the USB drive to
the TV, make sure you have backed up
the data in the drive to avoid the loss of
your data in case of a malfunction.
— The more free memory on the the USB
drive, the longer the recording length.
32