Setting Up Your Favourite Channels; Connecting To Your Home Network And The Internet - IKEA UPPLEVA Handbuch

to select Channel
• Press /
install, and press OK to enter.
• Select Automatic search, then
press OK to enter Automatic
search.
• Press OK to skip the country
selection and enter the next step.
Or use / to reselect your country,
then press OK to enter.
─ If you select Digital & Analogue,
then press OK to enter. Select
your Scan mode if available (Full
or Advanced). If you select Full,
select Scan and press OK to start
your automatic search relating to
all digital (DVB-C) and analogue
channels. If you select Advanced,
use the number buttons to adjust the
values for Frequency, Symbol rate
and Network ID, and use / to
select the Modulation mode. Press
/ to select Scan and press OK to
start your automatic search relating
to all digital (DVB-C) and analogue
channels.
─ If you select Digital, then follow
the same process as above to start
your automatic search relating to all
digital (DVB-C) channels.
─ If you select Analogue, then press
OK to start your automatic search
relating to all analogue channels.
c) If you have selected Satellite.
to select Channel
• Press /
install, and press OK to enter.
• Select Automatic search, then
press OK to enter. You can select an
operator and press OK to enter.
• Before you start scanning, you can
select Satellite Setup and press OK
to select a satellite and press OK again
to edit the parameters of the selected
satellite. When done, press MENU
on the remote control to go back.
Set your preferred Scan mode and
Channels by using / , select Scan
and press OK to start scanning.
4. The search may take a few minutes. You
can press MENU to stop the search.
5. Once the automatic search ends, press
MENU to return to the previous step or
press OK to restart your channel search.
6. After the automatic search, channels are
arranged in a preset order. If you wish to
skip channels, modify the preset order
or rename channels, select Setup >
Organiser and press OK to enter.

Setting up your favourite channels

You can create a list of your favourite TV
channels.
1. Press LIST.
2. Press the yellow button to enter
Channel list selection. Press
select the favourite list and press OK to
enter.
3. Press the blue button to start editing
the list. Press
the channels and press OK to select or
deselect them.
4. Press LIST or EXIT to exit.
Connecting to your home network
and the internet
Wireless connection
Your TV is equipped to be connected to your
home network wirelessly. To do that you
need a wireless router or modem. Follow
these steps to set up your wireless network
connection. Use /
through the menu or go through the
options, and press OK to enter submenus.
1. Press MENU on the remote control to
enter the menu. Navigate to Options
> Network settings > Internet
connection and select On.
2. Go to Interface and choose Wireless.
3. Go to Wireless setting and press OK
to enter.
4. You can set up the wireless network
connection in 3 ways:
a) Scan. If you want to see and choose
from all available networks in range.
- Select Scan and press OK to start
scanning. The TV will search for and
display all the available networks.
- Navigate to the desired network and
press OK to connect the TV.
- If you select a protected network you
will have to enter the corresponding
password. Press OK on the remote
control to display the virtual keyboard
where you can enter the password.
Select OK to leave the virtual
keyboard and confirm the password
by pressing > Next. If the connection
is successful press > Next again to
/
/ to scroll through
/ / to navigate
36
to