Sound Settings For Spdif Connected Devices; Divx Video; Energy Saving; Update Tv Channels - IKEA UPPLEVA Handbuch

Note: The CEC functions depend on the
devices connected and it is possible that
some devices may not interoperate correctly
when connected to this TV. The user manual
or the manufacturer of the problematic
devices should be consulted for further
information.
Sound settings for SPDIF
connected devices
When you have connected an audio device
via the SPDIF socket you can choose the
type of sound you want. Press MENU on the
remote control and select Options > SPDIF
type. Here you can choose between PCM,
Dolby D and Off.
─ If your audio device is Dolby digital
compliant you should choose Dolby D
as sound type. If you select Dolby D,
the SPDIF output format is
• Dolby digital when the programme's
sound format is Dolby Digital or
Dolby Digital Plus or HE-AAC.
• PCM when the programme's sound
format is MPEG.
─ If your audio device is not Dolby D
compliant you should choose PCM as
sound type.
─ If you select Off, this turns off the audio
output from the audio device connected
to the SPDIF socket.
Note: The options you may choose depend
on the programme you are watching. If you
select PCM and the sound is ahead of the
picture, you can select SPDIF delay from
the Options menu and press / to adjust
the delay time to synchronize the sound
with the picture.

DivX video

(* not available for some models)
DivX® is a digital video format created by
DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more
information and software tools to convert
your files into DivX videos.
This DivX Certified® device must be
registered in order to play purchased DivX
Video-on-Demand (VOD) movies.
To obtain your registration code, follow
these steps
Press MENU on the remote control.
•
Select Options > DivX(R)
•
registration.
• Press OK and your registration code will
be displayed.
Go to vod.divx.com for more information on
how to complete your registration.
To deregister your TV, follow these
steps
• Press MENU on the remote control.
Select Options > DivX(R)
•
deregistration.
• Press OK and a message will guide you.

Energy saving

1. Press MENU on the remote control
and select Setup > ECO Settings >
Energy Saving.
2. Press / to select the power saving
mode you want.
3. Press EXIT to close the menu.

Update TV channels

Press MENU on the remote control and
select Options > Network update. Select
On/Off to enable or disable the Network
update function.
─ When this function is on, the TV will
automatically update channels if your
DTV (Digital TV) service provider
updates their DTV network.
─ When this function is off, you need to
run the channel search again to get
new channels or remove unavailable
channels if your DTV service provider
adds or removes channels from their
DTV network.

Password

The default password for your TV is set to
1234. You can change this to a password of
your own by following these steps.
1. Press MENU on the remote control and
select Options > Lock.
2. Enter the password and select Change
password.
3. Enter your new password two times to
confirm your new password. A message
confirming that your password has been
changed will be displayed.
4. Press EXIT to close the menu.
40