Operator Panel - Rimage AutoPrinter RAS25 Benutzerhandbuch

Identify the Parts of the AutoPrinter

Operator Panel

The operator panel is located on the front of the
AutoPrinter. It includes an operator button and four
indicator lights. (One light is on the operator button.)
The control panel allows you to monitor and control the
printer.
The table below identifies the name and function of all
parts of the control panel.
Operator Panel Indicators
Image Name Functionality
Carousel The Carousel indicator light blinks when the AutoPrinter
indicator resumes operation after being paused.
light
Active The Active indicator light illuminates when the control
indicator center (PC) is communicating with the AutoPrinter. The
light light blinks one time per second when the system is paused
and four times per second when the system is waiting for
you to reset the bins. Refer to the
section for more information.
Power The Power indicator light illuminates when the AutoPrinter
indicator is powered on.
light
Operator Each time you press the operator button, the carousel
Button rotates to the next bin.
Fault The Fault indicator light is located on the operator button
indicator and illuminates if an error is detected.
light
2001809_A
Reset the AutoPrinter
For more information visit rimage.com/support
7