Signs And Symbols; Transport, Handling And Storage; Preparation Of Premises And Machine Installation - Enofrigo Miami Mini Bedienungsanleitung

10. SIGN AND SIMBOLS
The safety signs draw the operator's attention to possible dangers for the purposes of safety.
Check the perfect condition of all colours and words on the signs and symbols.
As soon as they become even slightly damaged, request the manufacturer or authorised dealer for a copy and
replace them.
SYM BOL DESCRIPTION SYMBOL DESCRIPTION
General switch Switch-off
Danger! Electricity
Switch-on supply

11. TRANSPORT, HANDLING AND STORAGE

The machine weights and dimensions are given in chapter n° 6.
The machine is packed in a cardboard box bearing the symbols and indications for handling. It is subsequently
placed on a pallet and loaded on a container or wagon by means of an adequate forklift truck.
The machine must always be handled with the utmost care and caution.
Operators assigned to handling of the machine must be qualified and adequately trained.
For storage of the machine, use dry ventilated rooms and protect the machine with a tarpaulin.
The manufacturer accepts no liability for damages caused by operations that have been performed incorrectly..
11.1 Procedure for unloading the machine by means of a forklift truck
Step 1: unload the machine, still packed, from the lorry with the utmost caution
Step 2: rest the machine gently on the ground
Step 3: remove the packaging and gently raise the machine with the forklift truck,
being careful not to damage it, until the pallet can be removed
Step 4: rest the machine gently on a flat uniform surface as near as possible to its
final position.

12. PREPARATION OF PREMISES AND MACHINE INSTALLATION

The room in which the machine will be installed, like the various existing systems, must
comply with current local regulations and technical specifications.
Position the machine in a dry well-ventilated place in compliance with the local technical-
22 Rev.01 – 11/11