General Precautions; Warranty Conditions; Identification Plate - Enofrigo Miami Mini Bedienungsanleitung

g. use of non- original spare parts or parts not specific for the model
h. total or partial failure to observe the instructions contained in this manual
i. exceptional events.

3. GENERAL PRECAUTIONS

• Do not leave the machine unattended, especially if there are children in the vicinity.
• The liquid contained in the cold accumulators is non-toxic but nevertheless should
not be swallowed.
• Only place pre-refrigerated or cold food in the refrigeration unit.
• The conservation of food with a high water content can cause the formation of con-
densation: this does not affect correct operation of the machine.
The machine must be connected to a suitable main grid switch with differential (on the outside of the
machine).
It is the customer's responsibility that such operation be carried out by a qualified technician.
For machines having two or more temperature controls, the switches placed next to the thermoregulator
serve only to turn off the refrigerator block, therefore they do not completely remove the voltage from the
system.
Before carrying out any installation, cleaning, maintenance or repair operation, turn off the main switch
and unplug the unit from the electrical power socket interlocked by means of a switch..

4. WARRANTY CONDITIONS

The machine warranty conditions are listed below:
• the duration of the warranty is one year (i.e. 12 consecutive months from the date of
purchase);
• the warranty excludes the electrical and electronic parts and components of the machine which, by their very
nature or as a result of their application, are subject to deterioration or wear;
• the warranty lapses if the machine has been used without observing the directions contained in this manual;
• the warranty lapses if the customer disassembles, modifies or attempts to repair the machine on its own or by
means of third parties not authorised by the manufacturer or the authorised dealer;
• all disputes will be referred exclusively to the Court of Padua.

5. IDENTIFICATION PLATE

The identification plate, containing all the data necessary for identification of the machine, is affixed as shown
by the arrow in figure n° 2.
The following data are provided:
• manufacturer identification;
• machine model;
• serial number;
• year of manufacture;
• CE conformity mark;
• machine climate class;
• technical specifications.
The data contained in the identification plate must be communicated when
making any service requests. The plate shown in the figure is intended purely as
an example.
18 Rev.01 – 11/11