Chal-Tec 10004566 Bedienungsanleitung Seite 49

Alarm
PTZ Control
Network
Setting
Click [Alarm] menu to enter into its sub menu (shown as Picture 6-
7).
You can set I/O alarm for every channel, motion detection alarm,
motion recording, motion trace, motion sensitivity, video loss alarm,
HDD not enough space alarm, HDD not found alarm and alarm
output time etc.
For details on setup method please refer to section 5.2.5.2.
System allows you setup motion detection settings for each channel
of DVR remotely (shown as Picture 6-9)
Click [PTZ control] to setup PTZ cameras. Remote setup methods
are the same as local DVR setup.
Please refer to Section 5.2.5.3 (shown as Picture 6-9).
Click [Network] to enter into [Network] menu. Remote setup
methods are the same as local DVR setup.
Please refer to Section 5.2.3. – Network Set.
Click [setting] menu to enter into the menu interface (shown as
Picture 6-11);
Click [...] button to preview net-viewer recording saving path and
screen capture saving path.
The menu also allows you set user password, on/off daylight-
saving time etc.