Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Plug-ins download and installation
Open IE browser and input IP address and web port of DVR, such as http://172.18.6.202:80/ and confirm to
download and install webcam. If your computer is connected to internet, computer will auto download and
install the webcam.
Reminder: If the webcam is not downloaded successfully, please check if your browser's safety level or
firewall setting is too advanced. Also refer to section 5.2.3 Network Setup to make sure network
configuration is correct, ports are forwarded correctly, and ActiveX is enabled.
Log-in to NetViewer
Main Interface of Net-viewer
Log in Net-viewer and show the interface as follows
Menu column
Menu column include [Live] menu, [Replay] menu and [Setup] menu.
Live
After Logging-in to system, system will enter into Live display (shown as Picture 6-3).
NetViewer Program
After webcam installs plug-ins, please select log-in language
(Chinese or English) and enter into password and click [Log-in]
button, and now you can view DVR remotely through NetViewer.
Please note default password is empty. System allows Administrator
to set new password as per instructions in section 5.2.6.2 -
[Password set] menu. Note: If you want to delete old IE webcam at
DVR system update, run the command characters: "regsvr32/u
dvrocx.ocx"
After successful Log-in to Net-viewer, system will enter into live
display interface and connect to audio/video feed automatically
(shown as Picture 6-2).
Werbung
Inhaltsverzeichnis
