Network Set - Chal-Tec 10004566 Bedienungsanleitung

You can also click on the Default button to use the system defaults.
The system default settings are:
Hr01:00 am-07:59 am : No recording
Hr08:00 am-18:59 pm : Normal recording
Hr 19:00 pm- 00:59 pm : Alarm recording
Explanation: Under the recording Set menu and recording search menu, original color stands for no
recording, "Red" stands for alarm recording, "Green" stands for normal recording and "Blue" stands for the
channel and date you have selected.

Network Set

Enter into [Main MenuNetwork Set] to proceed network set (Shown as picture 5-7):
When selecting DHCP, DHCP server will allocate DVR IP address automatically.
Recording options include All, CH-1, CH-2, CH-3, CH-4 respectively.
Please click the channel you need, the channel you select will be
highlighted in "Blue" unselected channels will be "Grey". To setup
weekly schedules, click on the box of the recording status you want
(Alarm, General, or No Record) and then click on each box in the
schedule time line that you want this method to apply to. You can
use the [From – To] pull-down menus and Copy button to Picture 5-
6 copy settings from one day to another day or all days. After you
complete the schedule you activate it by clicking the [Apply] button.
After selecting network mode - such as DHCP、PPPOE and static
allocation and setup web port, you could visit DVR remotely via
network.
When selecting PPPoE, you need to input user and password
provided by ISP supplier and set up web port (details please refer
to the below picture 5-8).
When selecting static allocation, you need to setup IP address, net-
mask, gateway and web port (shown as picture 5-9).