Chal-Tec 10004566 Bedienungsanleitung Seite 44

Motion Detect
System Function
Time Set
Click [MainDeviceMotion] to enter into the [Motion Detection]
menu to setup motion detection recording. The [Motion detection]
Menu has three sections, including Channel Status, Sensitivity and
Motion area.
Channel STATUS: This option allow you enable motion detection
on any channel.
SENSITIVITY: This option allows you to set sensitivity level of
motion detection from Highest, High, Normal to Low.
MD AREA: This option allows you select the area you want to be
sensitive to motion. The channel is separated into a 13*10 area.
When any object moves into the motion detection area, and the
area where the object is located is displayed in red recording will be
triggered. In the semi-transparent area the motion detection is off.
The [System] Menu includes the below sub-menus: Time Set, User
Password, Audio/Video Setting, Language select, System Info and
System Maintenance. After entering into the [System], you can
configure the system to meet your needs.
Click the [Main menu  System  Date/Time] in turn to enter into
[Time Set] menu. You could not only modify system date, time and
format, but also set daylight saving time and mode.