Hdd Format; Usb Format - Chal-Tec 10004566 Bedienungsanleitung

5. Refer to the below for [Audio on] setting procedure. (Setting parameter will be available after re-starting
multimedia player after [Audio on] set up.)
Setting  Audio channel setting  Normal video Bar  Select the channel you want to playback the audio
 Select the channel has audio files  Apply  OK.
After successfully setting the above, when you playback the current channel, you can open the channel's
audio function at the same time as the video
Device Management
HDD Management
Click [Main Menu  Device  HDD] to enter [HDD Management] menu (shown as Picture 5-30)
TOTAL SPACE:
Indicates total space available on Hard Drive.
FREE SPACE:
Indicates unused space available on the Hard Drive.
USEABLE REC TIME:
Based on current image detail/quality and frame rate, system will show you how Recording time you have
left on the Hard Drive.
OVERWRITE:
If you select "on" the system will automatically overwrite the oldest recordings once the hard drive is full; if
you select "off", recording will stop once the hard drive is full.

HDD FORMAT:

You use this option to format the hard drive, you can not record files to the hard drive until it has been
formatted. Click [Format HDD] button to start formatting. When selecting [Format HDD] option the system
will prompt you – "Format HDD will loss all the data, do you confirm?" ; click "OK", system will prompt you –
"Is formatting..." and "successful format"; and then system will restart automatically.

USB FORMAT:

Use this option to format USB devices.
Options in device management include Hard drive, External Alarm,
PTZ control, Mobile Phone Monitoring, and Motion Detection.
When you install a HDD, the system will automatically detect if
HDD is formatted or not; If HDD needs to be formatted, HDD
status will be shown as "Not format", otherwise, the HDD status
will be shown as "Normal" (refer to Picture 5-31)