Chal-Tec 10004566 Bedienungsanleitung Seite 43

5. Once the installation is complete the window in Pic 9 will be displayed to tell you that installation is
completed. Then you can go to the Applications folder and select the QQEye program (white box in Pic 10)
and click on the Open option (red box in Pic 10) to display the settings menu. After you complete the
settings and click on the Done button (red box in Pic 11) the Video window in Pic 12 will be displayed.
Default Access Point
Input the access point. System default for the access point is GPRS connection.
Server Address
Input the public IP address of the router the DVR is attached to (refer to section 5.2.3 Network Setup on
page 14 of the product manual).
Server Port
Web port: Same as the web port setting on the DVR, you need to forward this port from the Router to the
DVR. Setting range is between 1024 and 65535, the default setting is 18600. Note: this port is in addition to
the ports used for standard remote access.
User Name:
Same as user name setup in DVR under Menu, Devices, Mobile
Password
Same as password setup on DVR. (Please press Function key to save the password, left soft key won't be
able to save the password)
Channel:
Select the channel you want to monitor and click [OK] button to start video connection Network connection
status: percentage of buffer display, connection success, connection fail, play and stop.
Channel select, PTZ control, Zoom in/out, Focus and Iris
Play/Stop, Full screen/ Normal Display, Capture, Parameter setting and Exit
By clicking on the image you can see it full screen as in Pic 13