Chal-Tec 10004566 Bedienungsanleitung Seite 40

Mobile Phone Access
The DVR is currently compatible with mobile phones running Windows Mobile and Symbian operating
systems on 3G networks.
Before you can access the DVR from a mobile phone you need to setup the Network Configuration on the
DVR. Go to section 5.2.3 Network Setup on page 14 of the product manual for instructions on how to do
this. You also need to go to the Main Menu then Devices then Mobile and enter your user name and
password, and set the Server Port to 18600. This port also needs to be forwarded to the IP address of the
DVR along with the ports from 5.2.3 Network Setup.
Explanation: You can only see one channel at a time when viewing from a mobile phone. The speed of the
display depends on the speed of the internet connection. When accessing from a mobile phone with
Windows Mobile operating system, use the following procedure:
1. Webcam installation
First you need to install the webcam program that is included on the CD that comes with the DVR by copying
the "QQeye.CAB" file to the mobile phone. You can do this by attaching the mobile phone to a computer and
copying the file from the CD to the memory card on the phone, or by copying the file from the computer to
the phone's memory card through a memory card reader or through a Bluetooth connection.
2. Click the windows mobile folder (red box in Pic 1) and choose the file QQeye" Select the file which will
open the window in Pic 3. The file is generally faulted to save as Device, direct to phone, (shown in Pic 3)
but you can save it to Device or Storage Card.
3. Choose storage location and click [Install] button (red box in Pic 3) to start the installation (please refer to
display in Pic 4 below)
Mobile
Click [Main menuDeviceMobile] to enter into [Mobile] menu.
User Name: indicate user name of DVR.
User password: indicate user password of DVR
Server port: Mobile monitoring port. Setting range is between
1024 and 65535. Please note that
Explanation: Please connect DVR to Internet before setting DVR
port number and the server port no is not equal to Picture 5-37
network menus.