Video Loss - Chal-Tec 10004566 Bedienungsanleitung

Alarm Set
HDD LOSS:
Options are On and Off. If you select On there will be a buzzer sound and "H" sign on screen when HDD is
not detected or not formatted; on the contrary, if you close the function, there is only "H" sign to indicate
HDD not found, but no alarm sound when HDD not found or not formatted.
HDD SPACE:
Options are On and Off. When the alarm function is on, there are alarm sounds when the HDD is running out
of space; when the function is off, there are no alarm sounds.

VIDEO LOSS:

Options are On and Off. When the function is on, system will issue alarm sound and display video loss on the
preview interface; when the function is off, system will have no alarm sound, but the preview interface will
display video loss.
ALARM MANAGE:
Alarm Output(0s,10s,20s,40s,60s), Buzzer time (0s,10s,20,40s,60s) and alarm duration time (0s, 30s,
1minute, 2minute, 5minute)
Click [Main Menu  Device  Alarm] to enter into [Alarm setup]
menu to setup Alarm warnings (shown as Picture 5-32).
I/O STATUS: Options include NO (Normal-open), NC (Normal-
close) and OFF. Set to "Normal-open" if you use external sensor
alarms that are normally open, Set to "Normal-close" if you use
external sensor alarms that are normally closed, set to "off" if you
are not going to use external sensor alarms. You can use the DVRs
internal motion detection to record when motion is detected; you do
not external sensors to record on motion detection.