Indiglo ® Night-Light - Timex 02V-095000 Benutzerhandbuch

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from
date of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard
by calling 1 800-448-4639 during normal business hours... Payment must be
made within 30 days of purchase... Name, address,
telephone number, purchase date, and 5-digit model number required... You can
also mail a check for $5 to: Timex Extended Warranty, P...O... Box 1676, Dept...
EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FEATURES AND BASIC OPERATION
1... Date with MM-DD (month/day) format
2... Daily Alarm with Snooze feature
3... Hourly Chime
4... 24-Hour Stopwatch with Split time
5... INDIGLO night-light
®
INDIGLO
®
BUTTON
MODE
INDIGLO
®
BUTTON
MODE
Button functions shown with setting functions in parentheses
TIME
To set time and date
1... To start your watch remove the plastic guard from under the crown, then
press the crown in against the case... The second hand will begin advancing
in one-second intervals...
2... Pull the crown out all the way and turn to the correct analog time... Push the
crown in to restart the analog watch...Press START or ST/STP/ALM to set
Seconds to zero adding one minute if seconds are "30" or greater...
3... Press RESET or RESET/NEXT to set Hours, as indicated by its flashing.
Press START or ST/STP/ALM to advance the Hours setting... Press and
hold to increment quickly...
Note: As the Hours are incremented, the time indicator changes from "A"
(AM), to "P" (PM) to "H" (24-hour time)
4... Press RESET or RESET/NEXT to set Minutes, as indicated by its flashing.
Press START or ST/STP/ALM to advance the Minutes setting... Press and
hold to increment quickly...
5... Press RESET or RESET/NEXT to set the Month number, as indicated by
its flashing. Press START or ST/STP/ALM to advance the Month setting...
Press and hold to increment quickly...
6... Press RESET or RESET/NEXT to set the Day, as indicated by its flashing.
Press START or ST/STP/ALM to advance the Day setting... Press and hold
to increment quickly...
7... Press RESET or RESET/NEXT to set Day of the Week, as indicated by its
flashing. Press START or ST/STP/ALM to advance the Day of the Week
setting... Press and hold to increment quickly...
8... Press MODE to exit Time Set...
STOPWATCH
Use this function for timing events...
1... Press MODE until "ST" appears...
2... Press START or ST/STP/ALM to start timing...
3... With the stopwatch running, press RESET or RESET/NEXT to record a
®
4... Press RESET or RESET/NEXT to release the display and show the current
5... Press RESET or RESET/NEXT to record another Split time...
6... Press START or ST/STP/ALM to pause the timing...
7... Either press START or ST/STP/ALM to resume timing, or press RESET or
Note: If the Stopwatch was paused when the display was showing a Split time,
the first press of RESET or RESET/NEXT will show the final recorded time,
and the second press will reset the Stopwatch to zero...
ALARM
To turn on/off or to set a Daily alarm with a one-time snooze feature. To turn
on/off an hourly chime.
START
1... Press MODE until "AL" appears...
(INCREASE VALUE)
2... Press START or ST/STP/ALM repeatedly to turn on/off the Alarm (
3... To Set the Alarm, press RESET or RESET/NEXT. The Hour digit flashes
RESET
4... Press START or ST/STP/ALM to advance the Hours setting... Press and
(NEXT STEP)
5... Press RESET or RESET/NEXT to set the Minutes as indicated by its
6... Press RESET or RESET/NEXT to exit the Alarm Setting mode...
ST/STP/ALM
7... When the alarm sounds:
(INCREASE VALUE)
• Press START or ST/STP/ALM or RESET or RESET/NEXT to stop the
• Press MODE while the alert is sounding... This will stop the alert and
Note: The Alarm ON (
RESET/NEXT
(NEXT STEP)
INDIGLO
Press INDIGLO
Electroluminescent technology used in the INDIGLO
watch face at night and in low light conditions...
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated
Water-Resistance Depth
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1... Watch is water-resistant only as long as lens, push buttons and case remain
2... Watch is not a diver watch and should not be used for diving...
3... Rinse watch with fresh water after exposure to salt water...
4... Shock-resistance will be indicated on watch face or caseback... Watches are
1
Split time... The stopwatch will continue timing in the background...
running stopwatch time...
RESET/NEXT to reset the Stopwatch to zero...
the Hourly Chime (SIG or ) or both...
and the Alarm ON (ALM or ) lights...
hold to increment quickly...
Note: The Hours will be presented in the same format (12- or 24-hour time)
as the time setting...
flashing. Press START or ST/STP/ALM to advance the Minutes setting...
Press and hold to increment quickly...
alert, and the alarm will sound at the same time on the next day... OR,
postpone the alarm for 5 minutes...
) will flash to confirm Snooze mode.
NIGHT-LIGHT
®
button to illuminate watch display for 2-3 seconds...
®
30m/98ft
50m/164ft
100m/328ft
intact...
designed to pass ISO test for shock-resistance... However, care should be
taken to avoid damaging crystal/lens...
ENGLISH 02V-095000
) or
night-light illuminates
®
p.s.i.a. * Water Pressure Below Surface
60
86
160