Indiglo ® Night-Light - Timex DGTL 03T Benutzerhandbuch

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours... Payment must be made
within 30 days of purchase... Name, address,
telephone number, purchase date, and 5-digit model number required... You can
also mail a check for $5 to: Timex Extended Warranty, P...O... Box 1676, Dept... EF,
Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch...
FEATURES AND BASIC OPERATION
1... Date with MM-DD format (month/day)
2... Daily Alarm with Snooze Feature
3... Hourly Chime
4... 24-Hour Stopwatch with Split time
5... INDIGLO night-light
®
RESET
(NEXT STEP)
MODE
Button functions shown with setting functions in parentheses
TIME
To set time and date...
1... Press MODE until you get to the screen where the Seconds and "T" can be
seen flashing.
2... Press ST/STP to set Seconds to zero...
3... Press RESET to set Minutes, as indicated by its flashing. Press ST/STP to
advance the Minutes setting... Press and hold to increment quickly...
4... Press RESET to set Hours, as indicated by its flashing. Press ST/STP to
advance the Hours setting... Press and hold to increment quickly...
Note: As the Hours are incremented, the time indicator changes from
"A" (AM), to "P" (PM) to "H" (24-hour time)...
5... Press RESET to set the Day, as indicated by its flashing. Press ST/STP to
advance the Day setting... Press and hold to increment quickly...
6... Press RESET to set the Month number, as indicated by its flashing. Press
ST/STP to advance the Month setting... Press and hold to increment quickly...
7... Press RESET to set Day of the Week, as indicated by its flashing. Press ST/
STP to advance the Day of the Week setting... Press and hold to
increment quickly...
8... Press MODE to exit Time Set...
Notes:
A... To peek at the Date setting, press ST/STP.
B... To peek at the Daily Alarm setting, press RESET.
C. To turn on/off the Daily Alarm:
1. Press and hold RESET.
2. Press ST/STP repeatedly to turn on/off the Alarm. The Alarm symbol
indicates that the alarm is on.
s
D. To turn on/off the Hourly Chime:
1. Press and hold RESET.
2. Press MODE repeatedly to turn on/off the Hourly Chime. The Days of
the Week symbols all light to indicate that the hourly chime is on.
STOPWATCH
Use this function for timing events...
1... Press MODE until three of the Days of the Week symbols are flashing.
2... Press ST/STP to start timing...
3... With the stopwatch running, press RESET to record a Split time... The
4... Press RESET to release the display and show the current running
®
5... Press RESET to record another Split time...
6... Press ST/STP to pause the timing...
7... Either press ST/STP to resume timing, or press RESET to reset the
Note: If the Stopwatch was paused when the display was showing a Split time,
the first press of RESET will show the final recorded time, and the
second press will reset the Stopwatch to zero...
ALARM
To set a Daily Alarm with a five-minute snooze feature.
ST/STP
1... Press MODE until the Hours digit flashes.
(INCREASE VALUE)
2... Press ST/STP to advance the Hours setting... Press and hold to increment
Note: The Hours will be presented in the same format (12- or 24-hour time) as
the time setting...
3... Press RESET to set the Minutes as indicated by its flashing. Press ST/STP to
INDIGLO
®
BUTTON
Note: The Alarm symbol
4... Press MODE to exit Alarm Set and return to Time of Day...
5... When the alarm sounds:
To turn on/off the Daily Alarm:
1... From Time of Day mode, press and hold RESET.
2... Press ST/STP repeatedly to turn on/off the Alarm. The Alarm symbol
To turn on/off the Hourly Chime:
1... From Time of Day mode, press and hold RESET.
2... Press MODE repeatedly to turn on/off the Hourly Chime. The Days of the
To peek at the Daily Alarm setting, From Time of Day mode, press and hold
RESET.
INDIGLO
Press INDIGLO
Electroluminescent technology used in the INDIGLO
watch face at night and in low light conditions...
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated
Water-Resistance Depth
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1... Watch is water-resistant only as long as lens, push buttons and case remain
2... Watch is not a diver watch and should not be used for diving...
3... Rinse watch with fresh water after exposure to salt water...
4... Shock-resistance will be indicated on watch face or caseback... Watches are
1
stopwatch will continue timing in the background...
stopwatch time...
Stopwatch to zero...
quickly...
advance the Minutes setting... Press and hold to increment quickly...
indicates that the alarm is on...
s
• Press RESET to stop the alert, and the alarm will sound at the same time
on the next day, or
• Press ST/STP to stop the alert and postpone the alarm for 5 minutes...
indicates that the alarm is on...
Week symbols light to indicate that the hourly chime is on...
NIGHT-LIGHT
®
button to illuminate watch display for 2-3 seconds...
®
30m/98ft
50m/164ft
100m/328ft
intact...
designed to pass ISO test for shock-resistance... However, care should be
taken to avoid damaging crystal/lens...
ENGLISH 03T-096000
s
night-light illuminates
®
p.s.i.a. * Water Pressure Below Surface
60
86
160