Extended Warranty; Indiglo ® Night-Light - Timex DGTL Ana-Digi 03X Benutzerhandbuch

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5... You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours...
Payment must be made within 30 days of purchase... Name, address,
telephone number, purchase date, and 5-digit model number required... You
can also mail a check for $5 to: Timex Extended Warranty, P...O... Box 1676,
Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch...
FEATURES AND BASIC OPERATION
1... Date with MM-DD format (month/day)
2... 24-Hour Stopwatch with Split time
3... Daily Alarm and Hourly Chime
4... Dual Time (2nd Time Zone)
5... INDIGLO night-light
®
RESET
MODE
(NEXT STEP)
Button functions shown with setting functions in parentheses
TIME
To set time and date
1... To start your watch remove the plastic guard from under the crown,
then press the crown in against the case... The second hand will begin
advancing in one-second intervals...
2... Pull the crown out all the way and turn to the correct analog time... Push
the crown in to restart the analog watch...
3... From Time of Day mode in the digital watch, press and hold RESET... The
watch beeps and Seconds can be seen flashing...
4... Press ST/STP to set Seconds to zero...
5... Press MODE to set Hours, as indicated by its flashing... Press ST/STP to
advance the Hours setting... Press and hold to increment quickly...
6... Press MODE to set Minutes, as indicated by its flashing... Press ST/STP to
advance the Minutes setting... Press and hold to increment quickly...
7... Press MODE to set the Year number, as indicated by its flashing... Press
ST/STP to advance the Year setting... Press and hold to increment quickly...
8... Press MODE to set the Month number, as indicated by its flashing... Press
ST/STP to advance the Month setting... Press and hold to increment
quickly...
9... Press MODE to set the Date, as indicated by its flashing... Press ST/STP to
advance the Date setting... Press and hold to increment quickly...
10... Press RESET to exit Time Set...
11... To toggle between 12-Hour (A/P indicator) and 24-Hour time format, press
RESET.
Note: Press and hold ST/STP to peek at Month Number and Year...
ALARM
To turn on/off or to set the Daily alarm, or to turn on/off an hourly chime...
1... Press MODE until "AL" appears...
Note: The alarm settings are tied to the primary time zone (T1)...
2... Press ST/STP repeatedly to toggle the Alarm (
Hourly Chime ( ) on/off, or to toggle both on/off...
3... To Set the Alarm, press RESET... The Hour digit flashes and the Alarm ON
( s ) lights...
4... Press ST/STP to advance the Hours setting... Press and hold to increment
quickly...
Note: The Hours will be presented in the same format (12- or 24-hour
time) as the time setting...
®
ST/STP
(INCREASE VALUE)
INDIGLO
®
BUTTON
s ) on/off, to toggle the
1
5... Press MODE to set the Minutes as indicated by its flashing... Press ST/STP
to advance the Minutes setting... Press and hold to increment quickly...
6... Press RESET to exit the Alarm Set...
7... When the alarm sounds, press ANY button to silence the alert, or it will
stop automatically in about 60 seconds...
STOPWATCH
Use this function for timing events...
1... Press MODE until "SP" appears...
2... Press ST/STP to start timing...
3... With the stopwatch running, press RESET to record the Split time... The
display will show the Split time, but the stopwatch will continue timing in
the background...
4... Press RESET to release the display and show the current running
stopwatch time...
5... Press RESET to record another Split time...
6... Press ST/STP to pause the timing...
7... Either press ST/STP to resume timing, or press RESET to reset the
Stopwatch to zero...
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
DUAL TIME
To set the time for a second time zone
1... Press MODE until "T2" appears...
2... Press RESET... The Hours can be seen flashing... Press ST/STP to advance
the Hours setting... Press and hold to increment quickly...
3... Press MODE to set Minutes, as indicated by its flashing... Press ST/STP
to toggle between the same Minutes setting as Time Mode (T1) or 30
Minutes difference...
4... Press RESET to exit Dual Time Set...
Note: The Hours will be presented in the same format (12- or 24-hour
time) as the time setting...
INDIGLO NIGHT-LIGHT
®
Press INDIGLO button to illuminate watch display for 2-3 seconds...
®
Electroluminescent technology used in the INDIGLO
watch face at night and in low light conditions...
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated
Water-Resistance Depth
30m/98ft
50m/164ft
100m/328ft
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1... Watch is water-resistant only as long as lens, push buttons and case
remain intact...
2... Watch is not a diver watch and should not be used for diving...
3... Rinse watch with fresh water after exposure to salt water...
4... Shock-resistance will be indicated on watch face or caseback... Watches
are designed to pass ISO test for shock-resistance... However, care should
be taken to avoid damaging crystal/lens...
ENGLISH 03X-096000
LAP 3 = 7.08 LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39
night-light illuminates
®
p.s.i.a. * Water Pressure Below Surface
60
86
160