Timex 03M-09600 Benutzerhandbuch Seite 2

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours... Payment must be made
within 30 days of purchase... Name, address, telephone number, purchase date,
and 5-digit model number required... You can also mail a check for $5 to: Timex
Extended Warranty, P...O... Box 1676, Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FEATURES
Time and Date (12/24-hour format) • 24-Hour Stopwatch • Daily Alarm • Hourly
Chime
MODE
TO SET TIME / CALENDAR
1... Press MODE until Time Setting display appears – Seconds are flashing.
2... Press ST/STP to reset Seconds to zero...
3... Press RESET to go to Minutes (flashing).
4... Press ST/STP to increase Minutes... Press and hold ST/STP to change
rapidly...
5... Press RESET to go to Hours (flashing).
NOTE:
• If the watch is set for 12-hour time format, "A" or "P" will appear to the
right of Minutes to designate AM or PM...
• If the watch is set for 24-hour time format, "H" will appear to the right of
Minutes...
6... Press ST/STP to change Hours... Press and hold ST/STP to change rapidly...
The setting will go from AM, to PM, to 24-Hour settings...
7... Press RESET to go to Date (flashing).
8... Press ST/STP to change Date... Press and hold ST/STP to change rapidly...
9... Press RESET to go to Month (flashing).
10... Press ST/STP to increase Month... Press and hold ST/STP to change
rapidly...
11... Press RESET to go to Day of Week (flashing).
12... Press ST/STP to change Day of Week... Press and hold ST/STP to change
rapidly...
13... Press RESET to go to Seconds (flashing), or press MODE to exit Time
Setting...
NOTE:
• Press MODE at any time to exit Time Setting...
TO VIEW CALENDAR
In Time mode, press and hold ST/STP to see Calendar settings...
NOTE:
• "A" or "P" will appear next to Hours when the 12-Hour format is selected...
• No label appears next to Hours when 24-Hour format is selected...
TO TURN THE HOURLY CHIME ON/OFF
In Time mode, press and hold RESET, and then press MODE to turn the
Hourly Chime ON or OFF...
NOTE: The Days of Week all light to confirm that the Hourly Chime is active.
TO USE CHRONO
1... Press MODE to go to Chrono mode (one after Time mode)...
2... Press ST/STP to begin the stopwatch operation...
3... Press RESET to record a split and "freeze" the display... The stopwatch
continues to run in the background...
NOTE: If you press ST/STP to pause the stopwatch during the "frozen" display,
press RESET again to show the current stopwatch reading...
®
4... Press RESET to release the "frozen" display and show the current
stopwatch reading...
5... Press ST/STP to pause the stopwatch...
6... Either press ST/STP to resume stopwatch operation, or press RESET to
reset the stopwatch to all zeroes...
NOTE: Records elapsed time up to 24 hours and shows 1/100 of seconds for
the first hour.
TO SET DAILY ALARM
1... Press MODE to go to Alarm Setting mode (two after Time mode)... Hours will
be flashing.
ST/STP
(INCREMENT
NOTE:
ENTRY)
• Alarm Set mode uses the same time format as Time mode...
RESET
• If the watch is set for 12-hour time format, "A" or "P" will appear to the
(GO TO NEXT
ENTRY)
• If the watch is set for 24-hour time format, "H" will appear to the right of
2... Press ST/STP to change Hours... Press and hold ST/STP to change rapidly...
3... Press RESET to go to Minutes (flashing).
4... Press ST/STP to increase Minutes... Press and hold ST/STP to change
rapidly...
5... Press RESET to go to Hours (flashing), or press MODE to exit Alarm
Setting...
NOTE:
• When the alarm sounds, it will beep for about 60 seconds...
• To temporarily stop the alarm beeping and snooze the alarm for five
• To stop the alarm beeping altogether, press RESET...
TO TURN THE DAILY ALARM ON/OFF
In Time mode, press and hold RESET and then press ST/STP to turn the Daily
Alarm ON or OFF...
NOTE: The
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated...
Water-Resistance Depth
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1... Watch is water-resistant only as long as lens, push buttons and case
remain intact...
2... Watch is not a diver watch and should not be used for diving...
3... Rinse watch with fresh water after exposure to salt water...
4... Shock-resistance will be indicated on watch face or caseback... Watches are
designed to pass ISO test for shock-resistance... However, care should be
taken to avoid damaging crystal/lens...
BATTERY
Timex strongly recommends that a retailer or jeweler replace battery... If
applicable, push reset button when replacing battery... Battery type is indicated
on caseback... Battery life estimates are based on certain assumptions regarding
usage; battery life may vary depending on actual usage...
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP
LOOSE BATTERIES AWAY FROM CHILDREN.
1
right of Minutes to designate AM or PM...
Minutes...
minutes, press ST/STP...
q symbol lights to confirm that the Daily Alarm is active.
p.s.i.a. * Water Pressure Below Surface
30m/98ft
50m/164ft
100m/328ft
ENGLISH
03M-096000
60
86
160