Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATIONS
General
ON / OFF
Press POWER button (1) to turn on the unit. Press and hold the POWER button (1) to turn the
device off.
SOUND VOLUME ADJUSTMENT
Rotate VOLUME/SELECT knob (2) to adjust volume.
SELECT MENU
Press VOLUME/SELECT knob (2) repeatedly to change between: VOL (volume) > BAS (bass)
> TRE (treble) > BAL (balance) > FAD (fader) > LOUD (loudness) > DSP OFF (equalizer) > DX/
LOCAL > MONO/STEREO. Rotate the knob to change settings.
Note:
when the Equalizer is set, bass and treble adjustment is not available.
STEREO / MONO: Select mono mode if the FM stations are weak to improve quality of reception.
LOCAL / DX: Select LOCAL in areas with strong signals to let radio stop at only strong stations
during manual turning; select DX in areas with weak signals to listen to all stations.
MUTE
Press MUTE button (18) to mute down the sound. Press it again to unmute and recover previous
volume level.
AREA SETUP
In radio mode, press and hold VOLUME/SELECT knob for few seconds. Rotate the knob to select
between USA/EUR.

MODE SELECTION

Press the mode button (3) to change between different function modes: Radio / USB / SD/MMC /
AUX IN / BT. Please note, when not connected with any BT device nor any memory storage (USB/
SD card) connected, the modes will not be available for selection.
DISPLAY TIME
Press the DISP button to show time (it will be displayed for 5 seconds)
Press and hold the DISP button for few seconds, the device will enter time adjustment mode
(hour digits will flash). Rotate the knob to set the desired hour. Press the knob to confirm hour,
and go to minutes adjustment. Rotate the knob to set the desired minutes. Press the DISP
button to confirm and exit time adjustment mode.
EN
RESET
RESET button (6) is placed on the housing (underneath the front panel) and must be activated with
either a ball point pen or a thin metal object (do not use sharp objects to avoid damaging the unit).
The RESET button (6) is to be activated for the following reasons:
All function buttons do not operate.
Error symbol on the display.
22
Owner's manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis