Peiying PY8368.1 Bedienungsanleitung Seite 23

Radio
BAND SELECTION
In radio mode, press BAND button (7) to select the desired band. The reception band will change in
the following order: FM1 > FM2 > FM3 > MW1 (AM1) > MW2 (AM2).
STATION SELECTION
In radio mode, default station selection method is automatic. Press TUNE SEEK / FORWARD
button (8) or TUNE SEEK / BACKWARDS button (9) to start automatic station tuning function.
Press and hold TUNE SEEK / FORWARD button (8) to change into manual station selection
method, and press repeatedly TUNE SEEK / FORWARD button (8) or TUNE SEEK / BACKWARDS
button (9) to perform manual tuning mode.
AUTOMATICALLY MEMORY STORING AND PROGRAM SCANNING
Automatic Memory Storing
Press and hold AMS button (10) for few seconds, the radio searches from the current frequency and
the 6 strongest stations are stored into the corresponding preset number button.
STATION STORING
Use preset button (11~16)
• Preset memory station is loaded after the selected button is pressed.
• Preset memory station is saved when the selected button is pressed and held for few seconds.
SCAN
Press SCAN button (22) to search radio station. When a station signal strength level is sufficient,
the radio will play the station for 5 seconds and the frequency will be blinking on the LCD at the
same time.
Press and hold SCAN button (22) for more than 3 seconds to select desired station. The radio will
start playing the station.
SD CARD INSERTION
Owner's manual
EN
23