Troubleshooting - Silvercrest SLS 2200 C2 Bedienungsanleitung

Troubleshooting

A connected device is not charging.
♦ Press the ON/OFF button
♦ The solar charger's battery is empty. Charge the battery.
♦ No connection to the device. Check the connection.
♦ The solar charger can be used for end devices that require a
charging current of no more than 1 A. If the connected end
device requires a current of more than 1 A, the solar charger
will switch itself off immediately after being switched on with
the ON/OFF button
ability for your end device on the basis of the technical data
of your end device.
The solar charger's battery is not charging via the solar
panel.
♦ Check that the solar panel
The solar charger's battery is not charging via the USB
cable.
♦ Connection is faulty. Check the connection.
♦ Some computers deactivate the power supply to the USB ports
when they are switched off. If the solar charger's battery is not
being charged, check to see whether your computer is turned on.
NOTE
► If the above-mentioned solutions do not resolve the problem,
please contact Customer Service (see chapter Service).
SLS 2200 C2
briefly to start the charging process.
. In this case, check the charger's suit-
is receiving sufficient sunlight.
│
GB 75 ■