Transport, Storage & Cleaning - TEUFELBERGER tripleA Herstellerinformation Und Gebrauchsanleitung

of your physical and mental condition,
your safety might be compromised in scenarios of
normal use or in emergencies!
It is not permitted to make any changes or amend-
ments that are not expressly described in this
manufacturer's information manual. Those may only
be carried out by the manufacturer.
It is not permitted to use permanent marker pens or
stickers to add individual labeling/marking directly
to the textile components of these products, as the
chemicals contained in such pens or stickers can
compromise the strength of these materials.
TO BE OBSERVED PRIOR TO USE
Prior to every use, this product must be subject to
a visual inspection in order to verify its integrity,
readiness for use and proper functioning. Once the
product has been subject to a fall, its use must
be discontinued immediately. If the slightest doubt
remains, the product must be retired or may not be
used again until a duly compentent person, having
subjected such product to the required testing and
inspections, has approved its further use in writing.
It must be ensured that the recommendations for
use with other components be met:Further PPE
components must meet the harmonized standards
under the regime of regulation (EU) 2016/425. By
combining pieces of equipment in a way that will
compromise the safe functioning of one of these
pieces of equipment or of the combination as a
whole, you will be putting yourself in danger!
Ensure all neighbouring components are compati-
ble. Ensure all components are correctly configured.
Failure to do so increases risk of serious injury or
fatality. It is the responsibility of the user that a re-
levant and 'live' Risk Assessment is in place for the
work to be carried out which includes emergency
contingencies.
A plan of rescue measures that covers all fore-
seeable emergencies needs to be in place before
this product can be used. Prior to and during use,
rescue measures that can be executed safely
and effectively must be considered at all times.
SUSPENSION TRAUMA
(HARNESS HANG SYNDROME)
Remaining suspended motionless in a harness for
longer periods of time (e.g., after having fainted)
may cause one's blood circulation to be restricted
and consequently lead to a so-called "suspension
TRANSPORT, STORAGE &
CLEANING / REGULAR CHECKS
trauma". MORTAL DANGER! Make an EMERGENCY
CALL immediately!
Possible signs of a suspension trauma are pallor,
sweating, shortness of breath, impaired vision,
dizziness, nausea. (incomplete list, symptoms may
vary greatly from one person to another). Therefore,
affected persons should, if he/she is still able to
do that, take suitable self-help measures in order
to prevent blood congestion in the legs (e.g., by
moving the legs or taking the load off the leg loops,
e.g. by putting the feet in foot loops). If this is not
possible, it will be crucial to rescue the person from
the suspended position as fast as possible and pro-
vide the necessary emergency medical care.
CAUTION! DO NOT PLACE THE PERSON IN A SU-
PINE OR SHOCK POSITION IMMEDIATELY -> MOR-
TAL DANGER!
Place the accident victim either in a sitting or a
squatting position or, if the person is unconscious,
in a stable side position, if possible with the upper
body elevated (avoidance of heart failure due to
overly fast reflow of blood from the lower half of the
body).
TRANSPORT, STORAGE & CLEANING
The textile materials of our products consist of PA
or PES. The fitting parts consist of aluminum and
steel. The heat load must therefore never exceed
100°C. Chemicals may attack the material and cau-
se it to lose in strength. In case of reactions such
as discoloration or hardening, the product must be
retired for safety's sake.
The products much always be transported in
suitable packaging (protected from dirt, moisture,
chemicals, UV radiation, mechanical damage, etc.).
Conditions of storage:
Protected from light (UV radiation, welding
�
machines ...)
dry and clean
�
� at room temperature
� Not in the proximity of chemicals (acids, lyes,
liquids, vapours, gases, ...) and other
aggressive environments
� Protected against sharp-edged objects
For cleaning, use lukewarm water and mild-action
detergents. Then, rinse the equipment with clear
13