Cleaning/Maintenance; Cleaning The Appliance; Cleaning & Maintenance; Storage - Parkside PNTS 1300 D3 Originalbetriebsanleitung

Cleaning/Maintenance

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.

Cleaning the appliance

Never hose the appliance down
with water. Never use aggressive
cleaning agents or solvents. This
could damage the appliance.
• After use, empty the waste tank (
• Clean the waste tank with a damp cloth.
warm water and soap, and allow to
dry. If necessary, wash with lukewarm
water and soap and allow to dry.
when full (see "Replacement parts/Ac-
cessories" for reordering).
• Tap the optionally available folded
brush.
Maintenance
• The equipment is maintenance free.

Storage

6).
15) with luke-
Disposal/Environmental
protection
16). Be environmentally friendly. Return the
17) tool, accessories and packaging to a recy-
them.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
- For storage, wind the power
cord (10) around the retaining
bracket (2).
Fix the power supply cable using
the cable clip (11).
- Insert the separated vacuum
tubes (12) into the accessory
holder on the appliance feet (7).
- The attachment ports on the mo-
tor part serve as nozzle storage
( 4) or on the feets (7).
- Wind the vacuum hose (13)
around the device and plug
the handle section (14) into a
vacuum tube (12).
- Store the appliance in a dry
place and out of reach of chil-
dren.
Machines must not be disposed of
with household refuse.
G B I E
2 3