KERN KFE-TM Betriebs Und Installationsanleitung Seite 52

Procedure
 Confirm menu setting
Ensure that there are no objects on the weighing plate.
 Wait for stability display, then press
 The currently set adjustment weight will be displayed.
 Either use the displayed adjustment weight or change it with
, and
active digit is flashing.
 Confirm by
, „LoAd" will be shown.
 Carefully place adjusting weight in the centre of the weighing
plate. Wait for stability display, then press
 After the adjustment the balance will carry out a self-test.
Remove adjusting weight during selftest, balance will return
into weighing mode automatically.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.
14
by
.
(numerical input see chapter 2.1.1), the
.
.
KFE-TM-BA_IA-e-1614
